We have 55 products that are suitable for your selection. They are listed below. To ask us about any of them, simply pick up the phone or click the "i" icon next to each one.
- Piston-sensed design provides a long service life and enhanced safety
- High flow, low pressure drop with balanced valve design
- Lightweight, precision machined aluminum construction
- Wide variety of preset outlet pressures available
- Freeze-up is eliminated by a heating jacket that circulates hot radiator water
- ECE R110 approved versions available
- Balanced main valve minimizes inlet pressure fluctuations
- Piston sensed - highly reliable
- Water heat jacket standard
- Special design for dispensing of compressed natural gas
- Several porting configurations available
- Spring adjust, high outlet, high flow
- Balanced main valve for stable pressure control
- Modular design
- High safety and reliability
- Available in brass or stainless steel
- 345 and 690 bar rated inlet pressures
- Piston-sensed design provides a long service life and enhanced safety
- High flow, low pressure drop with balanced valve design
- Lightweight, precision machined aluminum construction
- Wide variety of preset outlet pressures available
- Precise pressure control
- Diaphragm sensed-highly sensitive
- Crack to reseat: 2% of set pressure
- Bubble-tight shutoff at all reseating pressures
- Extremely sensitive
- Ideal for both gas and liquid service
- High temperature versions available
- Accuracy : ±1% of relief pressure range
- Large Gylon®
- Bubble-tight shutoff at all reseating pressures
- 1/2", 3/4" and 1" NPT inlet and outlet port sizes diaphragm for excellent sensitivity
- High Flow
- Negative spring bias
- Designed for BIBS application
- Diaphragm sensed - highly sensitive
- Piston sensed - highly reliable
- Compact design
- Close pressure differential between crack and reseat
- Adjustable pressure stop standard
- Economical & extremely compact
- Durable piston sensor design
- High temperature (to 400°F) version
- High flow capacity
- Hand adjustable
- Diaphragm-sensed
- Dome loaded
- Four relief pressure ranges
- Reduces contamination & provides accurate regulation of non-corrosive & corrosive gases
- Convoluted metal to metal sealed diaphragm
- Close pressure differiental between crack & seat
- Economical
- Bubble-tight shut off
- 316 SST diaphragm provides metal to metal sealing integrity and good sensitivity
- Low crack to reseat pressure differential & excellent repeatability
- Bubble-tight shut off at all reseating pressures
- Suitable for non-corrosive & corrosive gases
- Metal to metal diaphragm assures minimum inboard/outboard leakage
- Controls subatmospheric to positive pressures
- High flow capacity
- Negative spring bias
- Economical, compact design
- Piston sensed
- Low hand knob torque
- Bubble-tight shut off at all reseating pressures
- Ideal to be used with air actuated devices such as regulators and control valves.
- Electropneumatic digital controller.
- High precision (0.1% accuracy) device.
- RS485 network capabilites.
- Free Software
- PID loop on board.
- Explosion-proof housing available.
- Extra analog/digital inputs/outputs available.
- Lightweight, compact design
- Piston sensed for high cycle life
- Designed for liquid or gas media
- Non-venting
- Field adjustable or pre-set ranges
- Excellent sensitivity
- Piston sensed for high cycle life
- Inlet & outlet gauge ports standard
- 40 micron (nominal) inlet filter
- Removable valve module for easy field repair
- Self-venting standard
- General purpose use
- Compact design
- Adjustable stop limits maximum outlet pressure
- Inlet & outlet gauge ports standard
- Non-venting standard
- InsertText
- Outlet pressure ranges are field changeable
- Numerous porting options
- Optional inlet pressures to 20,000 PSIG
- Large handknob provides fast low-torque pressure settings
- Self-venting standard
- Designed for both hydraulic and pneumatic service
- Captured vent standard
- Designed for heavy duty shock and vibration service
- Choice of metal to metal or soft seat
- Compatible with TESCOM Electronic Controllers
- New stem and seal design exends service life in crucial high pressure water-based hydraulic applications
- Specially designed seat and valve for excellent operation in hydraulic applications
- Segregated captured venting
- Tapered poppet design for better presure control
- Low droop, high flow
- Five outlet pressure ranges
- Accurately regulates pressures up to 17 bar (21 bar for dome loaded)
- Welded sanitary connections, tube stubs and VCR® fittings available
- 316L Stainless Steel barstock regulator desig
- Clean Service Certification of Compliance available: actual material certificates for body and fittings, list of wetted parts, weld records, typical certificate for the welding gas, statement concerning internal surface finish Ra 25 µinch (0.63 µm) internal surface finish
- PharmPure pressure regulator for pharma & biotech applications
- Max. rated inlet pressure: 10 bar (150 PSIG) Outlet pressure ranges: up to 0.7, 1.7, 3.5, 7 bar (10, 25, 50, 100 PSIG) Flow capacity: Cv = 0.06, 0.15 or 0.24 Body material: 316L Stainless Steel Internal surface finish: Ra 15 (0.4 µm) or 32 (0.8 µm) Connections: Sanitary Fitting or Tube Ends Port size: 1/2", 3/8"
- 316L Stainless Steel barstock regulator body design FDA and USP Class VI compliant soft goods Clean Service Certification of Compliance available: actual material certificates for body and fittings, list of wetted parts, weld records, typical certificate for the welding gas, statement concerning internal surface finish Ra 15 µinch (0.4 µm) or 32 µinch (0.8 µm) internal surface finish Precise pressure control Low flow specialty gas and clean steam applications Gauge ports available
- PharmPure pressure regulator for pharma & biotech applications
- Max. rated inlet pressure: 10 bar (150 PSIG) Outlet pressure ranges: up to 0.7, 1.7, 3.5, 7 bar (10, 25, 50, 100 PSIG) Flow capacity
- Cv = 0.02, 0.06, 0.15 or 0.24
- 316L Stainless Steel Internal surface finish: Ra 15 (0.4 µm) or 32 (0.8 µm)
- Sanitary Fitting or Tube Ends Port size: 1/2", 3/8"
- PharmPure pressure regulator for pharma & biotech applications (medium flow, high accuracy)
- Max. rated inlet pressure: 21 bar (300 PSIG) Outlet pressure ranges: 0 - 1.4 / 0 - 3.5 / 0 - 7 / 0 - 10 / 0 - 17 bar (0 - 20 / 0 - 50 / 0 - 100 / 0 - 150 / 0 -250 PSIG)
- Flow capacity: 1/2“ port size Cv = 2.5 3/4“ port size Cv = 3.5 1 & 1-1/2“ port size Cv = 5.0
- PharmPure pressure regulator for pharma & biotech applications (medium flow, high accuracy)
- Max. rated inlet pressure: 35 bar (500 PSIG) Outlet pressure ranges: up to 1.7, 3.5, 7 bar (25, 50 , 100 PSIG) Flow capacity
- 316L Stainless Steel barstock regulator body design FDA and USP Class VI compliant soft goods Clean Service Certification of Compliance available
- Dome loaded pressure regulator for high pressure and very high flow conditions
- Max. inlet pressure: 415 bar Outlet pressure range: 7 bar up to max. inlet pressure
- Body material: Stainless steel Connection type: NPT, SAE, MS33649 - Connection size: 3/4", 1"
- Piston-sensed regulator for high flow conditions with self-venting
- Max. inlet pressure: 310 bar (SST), 260 bar (brass) Outlet pressure ranges: up to 21, 42, 70, 104 bar
- Large piston sensor gives excellent sensitivity
- Balanced valve design assures stable downstream pressure
- Dome loaded pressure regulator for high pressure and high flow conditions
- Max. inlet pressure:Stainless steel: 690 bar (1/4" orifice) or 414 bar (3/8" orifice) - Brass & aluminum: 414 bar
- Outlet pressure range: up to max. inlet pressure Flow capacity
- Piston-sensed regulator for high flow conditions with segregated self-venting
- Max. inlet pressure: 414 bar Outlet pressure ranges: up to 14, 28 bar, up to 41 bar (air actuated or dome loaded)
- Flow capacity: Cv = 0.3
- Piston-sensed regulator for tracking applications
- Max. inlet pressure: 414 bar Outlet pressure range: 3.5 to 104 bar
- Body material: 303 stainless steel, 316 stainless steel, brass, chrome plated brass Connection type: NPT, BSP, NPT, MS33649 Connection size: 1/2', 3/4' (NPT only)
- Dome loaded pressure regulator for high pressure and high flow conditions
- Max. inlet pressure: 414 bar Outlet pressure range: 3.5 to 345 bar
- Body material: stainless steel or brass. Connections: 1/4", 1/2" or 3/4" NPT
- Piston sensed regulator (pilot operated) for high flow conditions at laser machines
- Max. inlet pressure: 207 bar Outlet pressure ranges: up to 35 bar
- Balanced main valve design assures stable outlet pressures
- Low pressure drop
- Max. rated inlet pressure: 21 bar Outlet pressure ranges: up to 1.4, 3.5, 7, 10, 17, 21 (dome loaded only) bar
- Body material: 316L stainless steel
- Connections: 1/2", 3/4", 1" Sanitary / 1/2", 3/4", 1" FVCR / 1/2", 3/4", 1" MVCR / 1/2", 3/4", 1" Tube.
- Pressure regulator for hydraulic applications (high pressure, low flow)
- Max. rated inlet pressure: 690 bar (1000 PSIG) Outlet pressure ranges: up to 35 (500), 55 (800), 103 (1500), 172 (2500), 276 (4000), 414 (6000), 690 (10000) bar (PSIG) Flow capacity: Cv = 0.06 (Main valve), Cv = 0.08 (Vent valve)
- Special models available for 1035 bar & 1380 bar
- Pressure regulator for hydraulic applications (high pressure, medium flow)
- Max. inlet pressure: 550 bar (8000 PSIG) Outlet pressure ranges: up to 105 (1500), 207 (3000), 345 (5000), 550 (8000) bar (PSIG) Flow capacity: Cv = 2.0 (Main valve), Cv = 1.6 (Vent valve)
- Body material: 303 or 316 stainless steel Connection type: NPT, SAE, MS33649 Connection size: 3/4"
- An optional wear insert on piston increases life in non-lubricating media
- Pressure regulator for hydraulic applications (high pressure, high flow)
- Max. inlet pressure: 345 bar (5000 PSIG) Outlet pressure ranges: up to 104 (1500), 345 (5000) bar (PSIG)
- Hardened 17-4 PH Stainless Steel seat and poppet provides excellent protection against shock and erosion
- Utilizes a piston style sensor, balanced main valve poppet and a non-adjustable vent Metal to metal seat
- Back-pressure regulator for hydraulic applications (high pressure, low flow)
- Control pressure ranges: up to 35 (500), 55 (800), 105 (1500), 175 (2500), 280 (4000), 415 (6000), 690 (10000) bar (PSIG) Flow capacity: Cv = 0.08
- Accuracy ± 1% of relief pressure range
- Set point repeatability exceeds conventional relief valves
- Back-pressure regulator for hydraulic applications (high pressure, medium flow)
- Max. rated pressure: 345 bar (5000 PSIG) spring & dome loaded, 690 bar (10000 PSIG) Air actuated Control pressure ranges: up to 69 (1000), 103 (1500), 241 (3500), 345 (5000),690 (10000) bar (PSIG) Flow capacity: Cv = 1.6
- Back-pressure regulator for hydraulic applications (high pressure, high flow)
- Control pressure ranges: 35 (500) Air loaded, 380 (5500) Dome loaded, 35 (500) bar (PSIG) Spring loaded Flow capacity: Cv = 5.0
- Available in air, dome and spring loaded versions
- Compatible with Tescom ER 3000 Electronic Controller
- Metal diaphragm regulator for absolute pressure control (sensitive)
- Max. inlet pressure: atmospheric to 28 bar Outlet pressure range: 67 mbar(a) to 1 bar(a)
- Available in dome load or air load
- Metal diaphragm back-pressure regulator for absolute pressure control
- Control pressure range: 67 mbar(a) to 2, 4.5, 8, 11 bar(a) Flow capacity: Cv = 0.04
- Body material: Stainless steel. Port type: SAE, NPT, MS33649, HPIC, Welded Fittings
- Vaporizing Regulator for corrosive and non-corrosive gases, ATEX 100 approved
- Max. inlet pressure: 241 bar Outlet pressure ranges: up to 1.7, 3.5, 7, 17, 35 bar
- Temperature classes: T2, T3 and T4 Heating versions: electric or steam heated
- Heating temperatures continously adjustable
- PharmPure pressure regulator for pharma & biotech applications (medium flow, high accuracy)
- Max. rated inlet pressure: 21 bar (300 PSIG) Outlet pressure ranges: 0 - 1.4 / 0 - 3.5 / 0 - 7 / 0 - 10 / 0 - 17 bar (0 - 20 / 0 - 50 / 0 - 100 / 0 - 150 / 0 -250 PSIG)
- Flow capacity: Cv = 10.0
- Connections: Sanitary Fitting, Tube Ends High Purity Internal Connections (H.P.I.C) (gauge port only)
- Metal diaphragm regulator for non-corrosive and corrosive gases
- Max. inlet pressure: 241 bar (high pressure model), 27 bar (low pressure model) Outlet pressure ranges: up to 1.7, 3.5, 7, 17, 35 bar
- Flow capacity: Cv = 0.06 (high pressure model), 0.15 (low pressure model).
- Body material: Stainless steel, Hastelloy®, Monel® or Brass
- Metal diaphragm regulator for non-corrosive and corrosive gases (sensitive)
- Max. inlet pressure: 241 bar (high pressure model), 27 bar (low pressure model) Outlet pressure ranges: up to 1.7, 3.5, 7, 10, 17 bar
- Flow capacity: Cv = 0.06 (high pressure model), 0.15 (low pressure model)
- Features a large convoluted diaphragm for extreme sensitivity with minimum droop
- Metal diaphragm regulator for precise pressure control of corrosive gases (positive seal)
- Max. inlet pressure: 207 bar Outlet pressure ranges: up to 1.7, 3.5, 7, 10 bar
- Repeatability: ±0.5 % of maximum rated outlet pressure
- Convoluted diaphragm provides maximum sensitivity, minimum droop
- Two stage metal diaphragm regulator for non-corrosive and corrosive gases
- Provides a continuous, accurate outlet pressure regardless of inlet pressure fluctuations
- Offers a decaying inlet characteristic of 3 mbar per 7 bar change in inlet pressure
- Metal diaphragm regulator for absolute pressure control (sub-atmospheric to positive)
- Max. inlet pressure: 240, 28, 8 bar (depending on flow capacity) Outlet pressure ranges: 67 mbar(a) to 1, 1.7, 3.5, 7 bar
- Flow capacity: Cv = 0.06 (240 bar inlet), 0.15 (28 bar inlet), 0.24 (8 bar inlet)
- Extremely accurate - designed to provide high flow at low control pressure - ideal purge regulator for low pressure
- Max. rated inlet pressure: 35 bar (500 PSIG) Outlet pressure ranges: 0 - 1 / 0 - 2 / 0 - 5 / 0 - 10 bar (0 - 15 / 0 - 30 / 0 - 75 / 0 - 150 PSIG)
- High flow, Cv = 1.8
- Metal diaphragm back-pressure regulator for low pressures
- Control pressure range: up to 1.7, 3.5, 7, 17 bar. Flow capacity: Cv = 0.08
- Reduces contamination and provides accurate regulation of any corrosive or non-corrosive gas
- Elastomeric diaphragm back-pressure regulator for vacuum applications
- Flow capacity: Cv = 0.25 Body material: Brass or nickel plated aluminum
- Controls sub-atmospheric pressures Excellent repeatability Accurate diaphragm-type regulation ± 0.1 % full scale accuracy High sensitivity of 0.025“ Hg achieved with constant bleed option Easy maintenance Low operating handknob torque Captured bonnet and panel mounting option available
- Metal diaphragm regulator for absolute pressure control (sub-atmospheric to positive)
- Max. inlet pressure: 240, 28, 8 bar (depending on flow capacity) Outlet pressure ranges: 67 mbar(a) to 1, 1.7, 3.5, 7 bar
- Economical sub-atmospheric pressure control Compact in size Metal to metal diaphragm to body seal Various modifications available
- Diaphragm regulator for absolute pressure control (very sensitive)
- Max. inlet pressure: 310 bar Outlet pressure ranges: 67 mbar(a) to 1.0, 3.5, 7, 24 bar
- Flow capacity: Cv = 0.06 Body material: brass or aluminum - Connections: 1/4" NPT
